Table 3.61 Range Of Continuous Waveform Period; Table 3.62 Range Of Amplitude - Rigol DG800 Pro Series Programming Manual

Table 3.61 Range of Continuous Waveform Period

Waveform
Sine
Square
Ramp
Pulse
Arb
Harmonic
Waveform
Sine
Square
Ramp
Pulse
Arb
Harmonic

Table 3.62 Range of Amplitude

Frequency
[1 μHz, 50 MHz]
(50 MHz, 100 MHz]
(100 MHz, 200 MHz] 2 mVpp to 4 Vpp
TIP
The noise amplitude range is related to the impedance setting:
• HighZ: 2 mVpp to 4 Vpp.
• Load (50 Ω): 1 mVpp to 2 Vpp.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
DG821 Pro DG822 Pro
40 ns to 1 Ms 40 ns to 1 Ms
50 ns to 1 Ms 50 ns to 1 Ms
1 μs to 1 Ms 1 μs to 1 Ms
100 ns to 1 Ms 100 ns to 1 Ms
100 ns to 1 Ms 100 ns to 1 Ms
100 ns to 1 ks 100 ns to 1 ks
DG902 Pro DG912 Pro
14.3 ns to 1 Ms 6.7 ns to 1 Ms
16.6 ns to 1 Ms 16.6 ns to 1 Ms
333.3 ns to 1 Ms 200 ns to 1 Ms
20 ns to 1 Ms 20 ns to 1 Ms
33.3 ns to 1 Ms 20 ns to 1 Ms
28.6 ns to 1 ks 13.3 ns to 1 ks
HighZ
2 mVpp to 20 Vpp
2 mVpp to 10 Vpp
Command System
DG852 Pro
20 ns to 1 Ms
25 ns to 1 Ms
1 μs to 1 Ms
40 ns to 1 Ms
66.6 ns to 1 Ms
40 ns to 1 ks
DG922 Pro
5 ns to 1 Ms
16.6 ns to 1 Ms
200 ns to 1 Ms
20 ns to 1 Ms
20 ns to 1 Ms
10 ns to 1 ks
Load (50 Ω)
1 mVpp to 10 Vpp
1 mVpp to 5 Vpp
1 mVpp to 2 Vpp
DG800 Pro/DG900 Pro Programming
Guide
63