Source[<N>]]:Burst:phase; Source[<N>]]:Burst:state - Rigol DG800 Pro Series Programming Manual

Command System
Examples
:SOURce1:BURSt:NCYCles 500 /*Sets the burst count of the N-Cycle
bursts to 500.*/
:SOURce1:BURSt:NCYCles? /*Queries the burst count of the N-Cycle
bursts for CH1. The query returns +5.000000000000000E+02.*/
3.11.4.5 [:SOURce[<n>]]:BURSt:PHASe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the start phase of the burst waveform for the specified channel.
Parameter
Name
<n>
<phase>
<lim>
Remarks
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the start phase in scientific notation. For example, the query might
return +1.000000000000000E+01, indicating that the start phase is 10°.
Examples
:SOURce1:BURSt:PHASe 10 /*Sets the start phase of the burst
waveform to 10° for CH1.*/
:SOURce1:BURSt:PHASe? /*Queries the start phase of the burst
waveform for CH1. The query returns +1.000000000000000E+01.*/
3.11.4.6 [:SOURce[<n>]]:BURSt:STATe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the on/off status of the burst mode for the specified channel.
DG800 Pro/DG900 Pro Programming
Guide
84
n >]]:BURSt:PHASe {< phase >|< lim >}
n >]]:BURSt:PHASe? [< lim >]
Type Range
Discrete {1|2}
Real -360° to 360°
Discrete {MINimum|MAXimum}
n >]]:BURSt:STATe < bool >
n >]]:BURSt:STATe?
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
0°
-