Source[<N>]]:Burst:internal:period - Rigol DG800 Pro Series Programming Manual

Remarks
• The gate polarity is only available for the gated burst mode
[:SOURce[<n>]]:BURSt:MODE
(
on the external signal levels (gated signals) at the rear-panel [AUX IN/OUT]
connector of the corresponding channel.
• The gate polarity can be set to the following:
-
-
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns NORM or INV.
Examples
:SOURce1:BURSt:GATE:POLarity NORMal /*Sets the gate polarity of
the burst waveform to positive for CH1.*/
:SOURce1:BURSt:GATE:POLarity? /*Queries the gate polarity of the
burst waveform for CH1. The query returns NORM.*/
3.11.4.2 [:SOURce[<n>]]:BURSt:INTernal:PERiod
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the burst period of internally-triggered N-Cycle bursts for the
specified channel.
Parameter
Name
<n>
<seconds>
<lim>
Remarks
• Burst period is only available for internally triggered N-Cycle burst mode.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
NORMal: positive polarity. When the external signal level is high (low), the
gate signal is true (false).
INVerted: negative polarity. When the external signal level is low (high),
the gate signal is true (false).
n >]]:BURSt:INTernal:PERiod {< seconds >|< lim >}
n >]]:BURSt:INTernal:PERiod? [< lim >]
Type
Discrete
Real
Discrete
). The generator controls the burst output based
Range
{1|2}
4 μs to 8000 s
{MINimum|MAXimum}
DG800 Pro/DG900 Pro Programming
Command System
Default
1
10 ms
-
Guide
81