Source[<N>]]:Voltage:offset - Rigol DG800 Pro Series Programming Manual

Command System
Name
<lim_query>
Remarks
• Define the amplitude upper/lower limit (
Vpp
restrictions:
|Low Level| ≤ Vpp
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the low level in scientific notation. For example, the query might
return -1.000000000000000E+00, indicating that the low level is -1 V.
Examples
:SOURce1:VOLTage:LOW -1 /*Sets the low level to -1 V for CH1.*/
:SOURce1:VOLTage:LOW? /*Queries the low level for CH1. The query
returns -1.000000000000000E+00.*/
3.11.20.8 [:SOURce[<n>]]:VOLTage:OFFSet
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the offset voltage for the specified channel.
Parameter
Name
<n>
<voltage>
<lim_set>
<lim_query>
Remarks
• The parameter <voltage> is affected by the amplitude setting
[:SOURce[<n>]]:VOLTage
(
the upper limit of the amplitude (
DG800 Pro/DG900 Pro Programming
Guide
164
Type
Discrete
/Vpp . The range of the low level should conform to the following
max min
/2, and Vpp
max
n >]]:VOLTage:OFFSet {< voltage >|< lim_set >}
n >]]:VOLTage:OFFSet? [< lim_query >]
Type
Discrete
Real
Discrete
Discrete
). |Offset|*2 plus the current amplitude cannot exceed
Range
{MINimum|MAXimum}
Table 3.62 Range of Amplitude
≤ (High Level - Low Level) ≤ Vpp
min
Range
{1|2}
Refer to Remarks
{MINimum|MAXimum|DEFault}
{MINimum|MAXimum}
Table 3.62 Range of Amplitude
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
-
) to
max
Default
1
0 Vdc
-
-
).