-
-
-
-
•
This command is only available for internal modulation source
[:SOURce[<n>]]:AM:SOURce
(
•
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns SIN, SQU, TRI, RAMP, NRAM, NOIS, or ARB.
Examples
:SOURce1:AM:INTernal:FUNCtion SQUare /*Sets the AM modulating
waveform to Square for CH1.*/
:SOURce1:AM:INTernal:FUNCtion? /*Queries the AM modulating
waveform for CH1. The query returns SQU.*/
3.11.1.5
[:SOURce[<n>]]:AM:SOURce
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the AM modulation source for the specified channel.
Parameter
Name
<n>
<source>
Remarks
•
INTernal: internal modulation source. When the internal modulation source is
selected, you can send
internal modulating waveforms.
•
EXTernal: external modulation source. When the external modulation source is
selected, the generator receives the external modulating signal from the rear-
panel [AUX IN/OUT] connector.
•
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
RAMP: UpRamp with 100% symmetry.
NRAMp: DnRamp with 0% symmetry.
NOISe: white gaussian noise.
ARB: arbitrary waveform.
n >]]:AM:SOURce < source >
n >]]:AM:SOURce?
Type
Discrete
Discrete
[:SOURce[<n>]]:AM:INTernal:FUNCtion
).
Range
{1|2}
{INTernal|EXTernal}
DG800 Pro/DG900 Pro Programming
Command System
Default
1
INTernal
to select the
Guide
67