Command System
Parameter
Name
<n>
<file_name>
Remarks
•
The parameter <n> specifies the channel (CH1 or CH2) to which the specified
sequence or Arb file under the current directory is loaded.
•
The parameter <file_name> specifies the name of the file under the specified
directory, for example, INT:\SEQ.seq.
Return Format
None.
Examples
:MMEMory:LOAD:DATA 1,INT:\SEQ.seq /*Loads the sequence file named
SEQ.seq under the C disk into CH1.*/
3.9.9
:MMEMory:LOAD:STATe
Syntax
:MMEMory:LOAD:STATe <
Description
Loads the specified state file.
Parameter
Name
<file_name>
Remarks
The parameter <file_name> specifies the name of the state file under the specified
directory, for example, INT:\Mystate.sta.
Return Format
None.
Examples
:MMEMory:LOAD:STATe INT:\Mystate.sta /*Loads the instrument state
file named Mystate.sta from the root directory of the internal
memory.*/
DG800 Pro/DG900 Pro Programming
Guide
50
Type
Range
Discrete
{1|2}
ASCII string
Valid filename
file_name >
Type
Range
ASCII string
Valid name of state file
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
-
Default
-