Source[<N>]]:Burst; Source[<N>]]:Burst:gate:polarity - Rigol DG800 Pro Series Programming Manual

Command System
Name
<bool>
Remarks
• If the Sweep (
[:SOURce[<n>]]:BURSt:STATe
(
[:SOURce[<n>]]:FUNCtion:SEQuence[:STATe]
(
will be disabled automatically when the modulation function is enabled.
• The harmonic, noise, DC, and pulse cannot be modulated for ASK.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns 0 or 1.
Examples
:SOURce1:ASKey:STATe ON /*Enables the ASK modulation function for
CH1.*/
:SOURce1:ASKey:STATe? /*Queries the on/off status of the ASK
modulation function for CH1. The query returns 1.*/
3.11.4 [:SOURce[<n>]]:BURSt
[:SOURce[<n>]]:BURSt commands are used to set the burst parameters such as
burst type, gate polarity, burst count, start phase, and internal trigger period.
3.11.4.1 [:SOURce[<n>]]:BURSt:GATE:POLarity
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the gate polarity of the burst waveform for the specified channel.
Parameter
Name
<n>
<polarity>
DG800 Pro/DG900 Pro Programming
Guide
80
Type Range
Bool {0|1|OFF|ON}
[:SOURce[<n>]]:SWEep:STATe
), or Sequence
n >]]:BURSt:GATE:POLarity < polarity >
n >]]:BURSt:GATE:POLarity?
Type Range
Discrete {1|2}
Discrete {NORMal|INVerted}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
0|OFF
), Burst
) function is currently enabled, it
Default
1
NORMal