Source[<N>]]:Track - Rigol DG800 Pro Series Programming Manual

• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
None.
Examples
:SOURce1:TRACe:DATA:DAC16
CODE,END,10,20,30,40,50,60,70,80,90,100,200,300,400,500,600,700,800,
900,1000,1100,1200,1300,1400,1500,1600,1700,1800,1900,2000,2100,2200
,2300 /*Downloads the waveform table data to the volatile memory of
CH1.*/
3.11.19 [:SOURce[<n>]]:TRACk
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the state of the channel track function for the specified channel.
Parameter
Name
<n>
<track>
Remarks
• The channel track function has the following three states.
-
-
-
• The track function is not available for DG821 Pro (unless the two-channel
upgrade option is installed).
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:TRACk < track >
n >]]:TRACk?
Type
Discrete
Discrete
ON: enables the track function. If the track function is enabled for a
specified channel, the instrument automatically copies the parameters and
states (except channel output on/off state) to the other channel. When the
parameters or states are modified, the modifications also apply to the other
channel. In this way, the two channels can output identical signals (channel
enabled).
OFF: disables the track function.
INVerted: the track function is enabled, but the output polarity of the
target channel is opposite to that of the source channel.
Range
{1|2}
{ON|OFF|INVerted}
DG800 Pro/DG900 Pro Programming
Command System
Default
1
OFF
Guide
157