Source[<N>]]:Phase:couple:offset; Source[<N>]]:Phase:couple:ratio - Rigol DG800 Pro Series Programming Manual

Command System
3.11.12.3 [:SOURce[<n>]]:PHASe:COUPle:OFFSet
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the phase deviation of the phase coupling for the specified channel.
Parameter
Name
<n>
<offset>
Remarks
• When modifying the deviation, if base channel parameters exceed the limits of
the coupled channel after coupling calculation, the generator will automatically
adjust the coupling deviation to avoid parameter overlimit.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the phase deviation in scientific notation. For example, the query
might return +1.000000000000000E+02, indicating that the phase deviation is 100°.
Examples
:SOURce1:PHASe:COUPle:OFFSet 100 /*Sets the phase deviation of the
phase coupling to 100° for CH1.*/
:SOURce1:PHASe:COUPle:OFFSet? /*Queries the phase deviation of the
phase coupling for CH1. The query returns +1.000000000000000E+02.*/
3.11.12.4 [:SOURce[<n>]]:PHASe:COUPle:RATio
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the phase ratio of the phase coupling for the specified channel.
DG800 Pro/DG900 Pro Programming
Guide
128
n >]]:PHASe:COUPle:OFFSet < offset >
n >]]:PHASe:COUPle:OFFSet?
Type Range
Discrete {1|2}
Real -360° to 360°
n >]]:PHASe:COUPle:RATio < ratio >
n >]]:PHASe:COUPle:RATio?
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
0°