Counter:gatetime:auto[:State]; Counter:hf - Rigol DG800 Pro Series Programming Manual

Command System
Return Format
The query returns the gate time in scientific notation. For example, the query might
return +1.00000000000000E-02.
Examples
:COUNter:GATetime 0.01 /*Sets the gate time to 10 ms.*/
:COUNter:GATetime? /*Queries the gate time. The query returns
+1.00000000000000E-02.*/
3.2.7

:COUNter:GATetime:AUTO[:STATe]

Syntax
:COUNter:GATetime:AUTO[:STATe] <
:COUNter:GATetime:AUTO[:STATe]?
Description
Sets or queries the on/off status of the auto gate function for counter measurements.
Parameter
Name
<bool>
Remarks
When it is enabled, the instrument will select an appropriate gate time automatically
according to the characteristics of the signal to be measured.
Return Format
The query returns 0 or 1.
Examples
:COUNter:GATetime:AUTO:STATe ON /*Sets the gate time to auto for
counter measurements.*/
:COUNter:GATetime:AUTO:STATe? /*Queries whether the auto gate
function is enabled. The query returns 1.*/
3.2.8

:COUNter:HF

Syntax
:COUNter:HF <
:COUNter:HF?
Description
Sets or queries the on/off status of the HF Suppression function for counter
measurements.
DG800 Pro/DG900 Pro Programming
Guide
12
bool >
Type Range
Bool {0|1|OFF|ON}
bool >
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
0|OFF