-
-
•
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns INT or EXT.
Examples
:SOURce1:FM:SOURce INTernal /*Sets the FM modulation source to
internal modulation source for CH1.*/
:SOURce1:FM:SOURce? /*Queries the FM modulation source for CH1.
The query returns INT.*/
3.11.5.5
[:SOURce[<n>]]:FM:STATe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the on/off status of the FM modulation function for the specified
channel.
Parameter
Name
<n>
<bool>
Remarks
•
If the Sweep (
(
[:SOURce[<n>]]:BURSt:STATe
[:SOURce[<n>]]:FUNCtion:SEQuence[:STATe]
(
will be disabled automatically when the modulation function is enabled.
•
The harmonic, noise, DC, and pulse cannot be modulated for FM.
•
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
INTernal: internal modulation source. When the internal modulation
source is selected, you can use
select the internal modulating waveforms.
EXTernal: when the external modulation source is selected, the generator
receives the external modulating signal from the rear-panel [AUX IN/OUT]
connector.
n >]]:FM:STATe < bool >
n >]]:FM:STATe?
Type
Discrete
Bool
[:SOURce[<n>]]:SWEep:STATe
[:SOURce[<n>]]:FM:INTernal:FUNCtion
Range
{1|2}
{0|1|OFF|ON}
), Burst
), or Sequence
) function is currently enabled, it
DG800 Pro/DG900 Pro Programming
Command System
to
Default
1
0|OFF
Guide
89