Source[<N>]]:Sum; Source[<N>]]:Sum:amplitude - Rigol DG800 Pro Series Programming Manual

Return Format
The query returns 0 or 1.
Examples
:SOURce1:PWM:STATe ON /*Enables the PWM modulation function for
CH1.*/
:SOURce1:PWM:STATe? /*Queries the on/off status of the PWM
modulation function for CH1. The query returns 1.*/
3.11.16 [:SOURce[<n>]]:SUM
[:SOURce[<n>]]:SUM commands are used to set and query the waveform summing
parameters such as sum ratio, sum frequency, sum waveform, and the summing
on/off status.
3.11.16.1 [:SOURce[<n>]]:SUM:AMPLitude
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the sum ratio of the waveform summing function for the specified
channel.
Parameter
Name
<n>
<amplitude>
<lim_set>
<lim_query>
Remarks
• Sum ratio is the ratio of the amplitude of the waveform to be added relative to
the amplitude of the basic waveform.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the sum ratio in scientific notation. For example, the query might
return +5.000000000000000E+01, indicating that the sum ratio is 50%.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:SUM:AMPLitude {< amplitude >|< lim_set >}
n >]]:SUM:AMPLitude? [< lim_query >]
Type Range
Discrete {1|2}
Real 0% to 100%
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
Command System
Default
1
50%
-
-
DG800 Pro/DG900 Pro Programming
Guide
145