System:communicate:lan:dhcp[:State] - Rigol DG800 Pro Series Programming Manual

Command System
Description
Reads the port number of the initial control connecting port for socket
communication.
Parameter
None.
Remarks
None.
Return Format
The query returns the port number; if the interface does not support the socket, it
returns 0.
Examples
:SYSTem:COMMunicate:LAN:CONTrol? /*Reads the port number of the
initial control connecting port for socket communication. The
query returns 5000.*/
3.12.4.2

:SYSTem:COMMunicate:LAN:DHCP[:STATe]

Syntax
:SYSTem:COMMunicate:LAN:DHCP[:STATe] <
:SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Description
Sets or queries the on/off status of the DHCP mode.
Parameter
Name
<bool>
Remarks
• In DHCP mode, it automatically assigns an IP address to the instrument from a
DHCP server.
• When the three IP configuration types are all turned on, the priority of the
parameter configuration from high to low is "DHCP", "Auto IP", and "Static IP".
• The three IP configuration types cannot be all turned off at the same time.
• After sending this command, execute
apply the current network setting for the new parameters to take effect.
DG800 Pro/DG900 Pro Programming
Guide
168
Type Range
Bool {0|1|OFF|ON}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
bool >
:SYSTem:COMMunicate:LAN:UPDate
Default
1|ON
to