Initiate[<N>][:Immediate]:All; Lxi Commands - Rigol DG800 Pro Series Programming Manual

• If the specified channel has
[:IMMediate]
system.
• When [<n>] is omitted, it is interpreted as CH1.
Return Format
None.
Examples
None.
3.6.4 :INITiate[<n>][:IMMediate]:ALL
Syntax
:INITiate[<
Description
Changes the status of the trigger system from "idle" to "wait-for-trigger" for both
channels.
Parameter
None.
Remarks
• Use
• If the specified channel has
[:IMMediate]
system.
Return Format
None.
Examples
None.
3.7

:LXI Commands

:LXI commands are used to set the on/off status of mDNS, restart the LAN, and
restore the network settings to default values.
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
:INITiate[<n>]:CONTinuous
:INITiate[<n>][:IMMediate]:ALL
and
n >][:IMMediate]:ALL
:ABORt to return the instrument to idle.
:INITiate[<n>]:CONTinuous
:INITiate[<n>][:IMMediate]:ALL
and
Command System
:INITiate[<n>]
set to ON,
have no effect on the trigger
:INITiate[<n>]
set to ON,
have no effect on the trigger
DG800 Pro/DG900 Pro Programming
Guide
37