Source[<N>]]:Pm:internal:function - Rigol DG800 Pro Series Programming Manual

3.11.13.3 [:SOURce[<n>]]:PM:INTernal:FUNCtion
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the PM modulating waveform for the specified channel.
Parameter
Name
<n>
<function>
Remarks
• PM supports the following internal modulating waveforms:
-
-
-
-
-
-
-
• This command is only available for internal modulation source
[:SOURce[<n>]]:PM:SOURce
(
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns SIN, SQU, TRI, RAMP, NRAM, NOIS, or ARB.
Examples
:SOURce1:PM:INTernal:FUNCtion SQUare /*Sets the PM modulating
waveform to Square for CH1.*/
:SOURce1:PM:INTernal:FUNCtion? /*Queries the PM modulating
waveform for CH1. The query returns SQU.*/
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:PM:INTernal:FUNCtion < function >
n >]]:PM:INTernal:FUNCtion?
Type
Discrete
Discrete
SINusoid: Sine wave.
SQUare: Square with 50% duty cycle.
TRIangle: Triangle with 50% symmetry.
RAMP: UpRamp with 100% symmetry.
NRAMp: DnRamp with 0% symmetry.
NOISe: white gaussian noise.
ARB: arbitrary waveform.
Range
{1|2}
{SINusoid|SQUare|TRIangle|
RAMP|NRAMp|NOISe|ARB}
).
DG800 Pro/DG900 Pro Programming
Command System
Default
1
SINusoid
Guide
133