Command System
Return Format
The query returns OFFS or RAT.
Examples
:SOURce1:VOLTage:COUPle:MODE OFFSet /*Sets the type of the
amplitude coupling mode to amplitude deviation for CH1.*/
:SOURce1:VOLTage:COUPle:MODE /*Queries the type of the amplitude
coupling mode for CH1. The query returns OFFS.*/
3.11.20.3
[:SOURce[<n>]]:VOLTage:COUPle:OFFSet
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the amplitude deviation of the amplitude coupling for the specified
channel.
Parameter
Name
<n>
<voltage>
Remarks
•
When modifying the deviation, if base channel parameters exceed the limits of
the coupled channel after coupling calculation, the generator will automatically
adjust the coupling deviation to avoid parameter overlimit.
•
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the amplitude deviation in scientific notation. For example, the
query might return +5.000000000000000E+00, indicating that the amplitude
deviation is 5 Vpp.
Examples
:SOURce1:VOLTage:COUPle:OFFSet 5 /*Sets the amplitude deviation of
the amplitude coupling to 5 Vpp for CH1.*/
:SOURce1:VOLTage:COUPle:OFFSet? /*Queries the amplitude deviation
of the amplitude coupling for CH1. The query returns
+5.000000000000000E+00.*/
DG800 Pro/DG900 Pro Programming
Guide
160
n >]]:VOLTage:COUPle:OFFSet < voltage >
n >]]:VOLTage:COUPle:OFFSet?
Type
Range
Discrete
{1|2}
Real
-20 Vpp to +20 Vpp
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
0 Vpp