System:communicate:lan:mac - Rigol DG800 Pro Series Programming Manual

Command System
Description
Sets or queries the IP address.
Parameter
Name
<ip>
Remarks
• The format of <ip> is nnn.nnn.nnn.nnn; wherein, the first nnn ranges from 1 to
223 (excluding 127), and the other three range from 0 to 255.
• You are recommended to ask your network administrator for an address
available.
• When Static IP mode is enabled with both DHCP and Auto IP disabled, the IP
address is used.
• After sending this command, execute
apply the current network setting for the new parameters to take effect.
Return Format
The query returns the IP address, for example, 172.16.3.128.
Examples
:SYSTem:COMMunicate:LAN:IPADdress 172.16.3.128 /*Sets the IP
address to 172.16.3.128.*/
:SYSTem:COMMunicate:LAN:IPADdress? /*Queries the current IP
address. The query returns 172.16.3.128.*/
3.12.4.8

:SYSTem:COMMunicate:LAN:MAC?

Syntax
:SYSTem:COMMunicate:LAN:MAC?
Description
Queries the MAC address.
Parameter
None.
Remarks
A MAC (Media Access Control) address, also referred to as a hardware address, is
used to identify the network device address. For each instrument, the MAC address
is unique. When assigning the IP address for the instrument, the system uses the
MAC address to identify the instrument. The MAC address (48 bits, namely 6 bytes)
is usually expressed in hexadecimal format, such as 00:2A:A0:AA:E0:56.
DG800 Pro/DG900 Pro Programming
Guide
172
Type Range
ASCII string Refer to
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Remarks
:SYSTem:COMMunicate:LAN:UPDate
Default
-
to