Source[<N>]]:Fskey:polarity - Rigol DG800 Pro Series Programming Manual

Command System
Parameter
Name
<n>
<rate>
<lim>
Remarks
• This command is only available for internal modulation source
[:SOURce[<n>]]:FSKey:SOURce
(
frequency "shifts" between the carrier frequency (
and hop frequency (
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the FSK rate in scientific notation. For example, the query might
return +1.500000000000000E+02, indicating that the FSK rate is 150 Hz.
Examples
:SOURce1:FSKey:INTernal:RATE 150 /*Sets the FSK rate to 150 Hz for
CH1.*/
:SOURce1:FSKey:INTernal:RATE? /*Queries the FSK rate for CH1. The
query returns +1.500000000000000E+02.*/
3.11.7.3 [:SOURce[<n>]]:FSKey:POLarity
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the FSK modulation polarity for the specified channel.
Parameter
Name
<n>
<polarity>
Remarks
• The FSK modulation polarity can be set to the following:
DG800 Pro/DG900 Pro Programming
Guide
100
Type Range
Discrete {1|2}
Real 2 mHz to 1 MHz
Discrete {MINimum|MAXimum}
[:SOURce[<n>]]:FSKey:FREQuency
n >]]:FSKey:POLarity < polarity >
n >]]:FSKey:POLarity?
Type Range
Discrete {1|2}
Discrete {POSitive|NEGative}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
). FSK rate is the rate at which the output
[:SOURce[<n>]]:FREQuency
).
Default
1
100 Hz
-
)
Default
1
POSitive