Source[<N>]]:Phase - Rigol DG800 Pro Series Programming Manual

Command System
Return Format
None.
Examples
:SOURce1:PARameter:COPY SWAP /*Swaps the states of the two
channels.*/
3.11.12 [:SOURce[<n>]]:PHASe
[:SOURce[<n>]]:PHASe commands are used to set and query the start phase of the
channel waveform (basic waveform and Arb), perform align phase, and set the phase
coupling.
3.11.12.1 [:SOURce[<n>]]:PHASe
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the start phase of the waveform (basic waveform and Arb) for the
specified channel.
Parameter
Name
<n>
<phase>
<lim_set>
<lim_query>
Remarks
When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the start phase in scientific notation. For example, the query might
return +5.000000000000000E+01, indicating that the start phase is 50°.
Examples
:SOURce1:PHASe 50 /*Sets the waveform start phase to 50° for CH1.*/
:SOURce1:PHASe? /*Queries the waveform start phase for CH1. The
query returns +5.000000000000000E+01.*/
DG800 Pro/DG900 Pro Programming
Guide
126
n >]]:PHASe {< phase >|< lim_set >}
n >]]:PHASe? [< lim_query >]
Type Range
Discrete {1|2}
Real -360° to 360°
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
0°
-
-