Command System
:OUTPut1:LOAD? /*Queries the output impedance for CH1 output
connector. The query returns 9.9E+37.*/
3.10.3
:OUTPut[<n>]:POLarity
Syntax
:OUTPut[<
:OUTPut[<
Description
Sets or queries the output polarity for the specified channel.
Parameter
Name
<n>
<polarity>
Remarks
•
The output polarity sets the signal on the output connector to normal (NORMal)
or inverted (INVerted). In Normal mode, the instrument outputs a normal
waveform; in Invert mode, the instrument inverts the waveform and then
outputs the inverted waveform.
•
The waveform is inverted relative to the offset voltage. The offset voltage
remains unchanged when the waveform is inverted. The sync signal related to
the waveform is not inverted.
•
When [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns NORM or INV.
Examples
:OUTPut1:POLarity NORMal /*Sets the CH1 output polarity to Normal.*/
:OUTPut1:POLarity? /*Queries the CH1 output polarity. The query
returns NORM.*/
3.10.4
:OUTPut[<n>][:STATe]
Syntax
:OUTPut[<
:OUTPut[<
DG800 Pro/DG900 Pro Programming
Guide
56
n >]:POLarity < polarity >
n >]:POLarity?
Type
Discrete
Discrete
n >][:STATe] < state >
n >][:STATe]?
Range
{1|2}
{NORMal|INVerted}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
NORMal