Source[<N>]]:Pm:internal:frequency - Rigol DG800 Pro Series Programming Manual

Command System
Return Format
The query returns the PM phase deviation in scientific notation. For example, the
query might return +5.000000000000000E+01, indicating that the phase deviation is
50°.
Examples
:SOURce1:PM:DEViation 50 /*Sets the PM phase deviation to 50° for
CH1.*/
:SOURce1:PM:DEViation? /*Queries the PM phase deviation for CH1.
The query returns +5.000000000000000E+01.*/
3.11.13.2 [:SOURce[<n>]]:PM:INTernal:FREQuency
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the PM modulation frequency for the specified channel.
Parameter
Name
<n>
<frequency>
<lim_set>
<lim_query>
Remarks
• This command is only available for internal modulation source
[:SOURce[<n>]]:PM:SOURce
(
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the frequency in scientific notation. For example, the query might
return +1.500000000000000E+02, indicating that the frequency is 150 Hz.
Examples
:SOURce1:PM:INTernal:FREQuency 150 /*Sets the frequency of the PM
modulating waveform to 150 Hz for CH1.*/
:SOURce1:PM:INTernal:FREQuency? /*Queries the frequency of the PM
modulating waveform for CH1. The query returns +1.500000000000000E
+02.*/
DG800 Pro/DG900 Pro Programming
Guide
132
n >]]:PM:INTernal:FREQuency {< frequency >|< lim_set >}
n >]]:PM:INTernal:FREQuency? [< lim_query >]
Type Range
Discrete {1|2}
Real 2 mHz to 1 MHz
Discrete {MINimum|MAXimum|DEFault}
Discrete {MINimum|MAXimum}
).
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Default
1
100 Hz
-
-