Source[<N>]]:Function:sequence:list:period - Rigol DG800 Pro Series Programming Manual

Command System
Description
Sets or queries the length of the specified step of the sequence waveform for the
specified channel.
Parameter
Name
<n>
<num>
<value>
<lim>
<all>
Remarks
• For DG800 Pro series, the range of <value> is from 32 pts to 2 Mpts (8
Mpts/CH optional) and the total points of valid steps (the loop is not 0) of the
current sequence cannot exceed 2 Mpts (8 Mpts/CH optional); for DG900 Pro
series, the range of <value> is from 32 pts to 16 Mpts (32 Mpts/CH optional)
and the total points of valid steps (the loop is not 0) of the current sequence
cannot exceed16 Mpts (32 Mpts/CH optional)
• You can use <all> to query the length of all steps.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
For a specified step, the query returns an integer; for all the steps (ALL), the query
returns 64 integers (representing the lengths of 64 steps) separated by ",".
Examples
:SOURce1:FUNCtion:SEQuence:LIST:LENGth 1,100 /*Sets the length of
the step 1 of the sequence waveform to 100 for CH1.*/
:SOURce1:FUNCtion:SEQuence:LIST:LENGth? 1 /*Queries the length of
the step 1 of the sequence waveform for CH1. The query returns
100.*/
3.11.8.13 [:SOURce[<n>]]:FUNCtion:SEQuence:LIST:PERiod
Syntax
[:SOURce[<
[:SOURce[<
DG800 Pro/DG900 Pro Programming
Guide
112
Type Range
Discrete {1|2}
Integer 1 to 64
Integer Refer to
Discrete {MINimum|MAXimum}
Discrete {ALL}
n >]]:FUNCtion:SEQuence:LIST:PERiod < num >,{< value >|< lim_set >}
n >]]:FUNCtion:SEQuence:LIST:PERiod? {< num >|<lim_query>}
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Remarks
Default
1
-
-
-
-