Source[<N>]]:Frequency:couple:offset - Rigol DG800 Pro Series Programming Manual

Examples
:SOURce1:FREQuency:COUPle:MODE OFFSet /*Sets the type of the
frequency coupling mode to frequency deviation for CH1.*/
:SOURce1:FREQuency:COUPle:MODE? /*Queries the type of the
frequency coupling mode for CH1. The query returns OFFS.*/
3.11.6.4 [:SOURce[<n>]]:FREQuency:COUPle:OFFSet
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the frequency deviation of the frequency coupling for the specified
channel.
Parameter
Name
<n>
<offset>
Remarks
• When modifying the deviation, if base channel parameters exceed the limits of
the coupled channel after coupling calculation, the generator will automatically
adjust the coupling deviation to avoid parameter overlimit.
• The range of the frequency deviation is limited by the waveform type and
instrument model.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns the frequency deviation in scientific notation. For example, the
query might return +1.000000000000000E-02, indicating that the frequency
deviation is 10 mHz.
Examples
:SOURce1:FREQuency:COUPle:OFFSet 0.01 /*Sets the frequency
deviation of the frequency coupling to 10 mHz for CH1.*/
:SOURce1:FREQuency:COUPle:OFFSet? /*Queries the frequency
deviation of the frequency coupling for CH1. The query returns
+1.000000000000000E-02.*/
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:FREQuency:COUPle:OFFSet < offset >
n >]]:FREQuency:COUPle:OFFSet?
Type Range
Discrete {1|2}
Real Refer to
Remarks
DG800 Pro/DG900 Pro Programming
Command System
Default
1
0
Guide
93