Wai; Initiate Commands - Rigol DG800 Pro Series Programming Manual

Command System
Remarks
None.
Return Format
The query returns a decimal integer. The query returns a 0 if the self-test passes.
Examples
None.
3.5.15

*WAI

Syntax
*WAI
Description
Waits for the operation to complete. This command is used to make sure that the
previous command is complete before the next command is issued.
Parameter
None.
Remarks
For example, you want to use :SOURce1:SWEep:SPACing LINear and then
use :TRIGger1:IMMediate. To make sure that :SOURce1:SWEep:SPACing LINear
can be completed before executing the next command, you can insert *WAI between
the two commands.
Return Format
None.
Examples
None.
3.6

:INITiate Commands

:INITiate commands are used to set or query the "wait-for-trigger" state of the
instrument.
NOTE
The states of the trigger system include "wait-for-trigger", "action-in-progress", and "idle".
• Wait-for-trigger: when the system is in "wait-for-trigger" state, it can detect the trigger
event. Once a trigger event is generated, the system enters the "action-in-progress"
state.
DG800 Pro/DG900 Pro Programming
Guide
34
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.