Rigol DG800 Pro Series Programming Manual page 18

Programming Overview
Web Control
When the instrument is connected to the PC via the LAN interface, you can use Web
Control to send SCPI commands from the PC to the instrument. Operation
Procedures:
1. Obtain the instrument's IP address and input it in the browser address bar to log in
to the Web Control page.
2. After you enter the Web Control interface, click the "SCPI Panel Control" button to
enter the SCPI Command interface.
3. Input the specified SCPI command and then click Send & Read to send the
command. The operation process and the returned value will be displayed in the
current interface.
DG800 Pro/DG900 Pro Programming
Guide
6
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.