Source[<N>]]:Harmonic:order - Rigol DG800 Pro Series Programming Manual

of all orders of the harmonic (ALL), the query returns all phases separated by
commas.
Examples
:SOURce1:HARMonic:COMBine:PHASe 5,10 /*Sets the phase of the 5th
order of harmonic to 10° for CH1.*/
:SOURce1:HARMonic:COMBine:PHASe? 5 /*Queries the phase of the 5th
order of harmonic for CH1. The query returns 10.000000.*/
3.11.9.4 [:SOURce[<n>]]:HARMonic:ORDer
Syntax
[:SOURce[<
[:SOURce[<
Description
Sets or queries the order of the order harmonic for the specified channel.
Parameter
Name
<n>
<value>
<lim>
Remarks
• The max. fundamental frequency (
and max. harmonic frequency (
harmonic order may modify the fundamental frequency. For the harmonic
frequency upper limit (
Continuous Waveform Frequency
• When the harmonic type (
can use this command to set the harmonic component to be output.
• When [:SOURce[<n>]] or [<n>] is omitted, it is interpreted as CH1.
Return Format
The query returns an integer. For example, the query might return 10, indicating that
the harmonic order is 10.
Examples
:SOURce1:HARMonic:ORDer 10 /*Sets the order of the order harmonic
to 10 for CH1.*/
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
n >]]:HARMonic:ORDer {< value >|< lim >}
n >]]:HARMonic:ORDer? [< lim >]
Type Range
Discrete {1|2}
Integer 2 to 20
Discrete {MINimum|MAXimum}
F
) of different models, refer to
max
[:SOURce[<n>]]:HARMonic[:TYPE]
F ) is limited by the harmonic order (
fund
F F F
): = (2 x ÷
max fund max
.
DG800 Pro/DG900 Pro Programming
Command System
Default
1
2
-
N )
N ). Changing the
Table 3.60 Range of
) is set to order, you
Guide
121