Keypad Operation - Kenwood NEXEDGE NX-200 Function Reference

3 BASIC OPERATIONS
3.3 Using Function Keys

Keypad Operation

The keypad operating method can be selected according to the user's purpose.
Functions can be assigned to the keypad by using KPG-111D/ DN. Following is the list of the functions that can be
assigned to the transceiver for Keypad Operation.
Configuration
Pressing a key on the keypad of the transceiver causes the Key-entry Error Tone to sound, but it has no
None
effect to the transceiver.
Pressing a key on the keypad can directly specify a channel. (Refer to
Channel Entry
Specifying the Number (Channel Entry) on page
When the zone of an NXDN Trunking system is selected, pressing the [0] to [9] keys on the transceiver's
keypad can directly specify the Group ID in the NXDN Trunking system. (Refer to
Specifying the ID (Group ID Entry) (NXDN Trunking System Only) on page
Group ID/Channel Entry
When the zone in other than an NXDN Trunking system is selected, pressing the [0] to [9] keys on the
transceiver's keypad can directly specify the channel number. (Refer to
Specifying the Number (Channel Entry) on page
Pressing a key on the keypad can directly select the OST from the OST List 1 to OST List 40. (Refer to
OST
Changing the Decode/ Encode Combination of the QT/DQT (OST) on page
Pressing a key on the keypad can select and send a DTMF code configured for the Autodial List. (Refer to
Autodial
14 DTMF on page
Every time a key on the keypad is pressed, the DTMF code is instantly sent. (Refer to
Keypad Auto PTT
359.)
Pressing the [0] to [9] keys on the keypad enters Selcall Mode. In Selcall Mode, a call can be initiated by a
Selcall (FleetSync) user selecting a Fleet/ ID registered in the ID List or directly entering a Fleet/ ID. (Refer to
Selective Call on page
Pressing the [0] to [9] keys on the keypad enters Status Mode. In Status Mode, a Status Message can be
Status (FleetSync/ sent by a user selecting a status configured in the FleetSync Status List or NXDN Status List, or directly
NXDN) entering a Status number. (Refer to
12.6 Sending and Receiving a Status Message (Status Call) on page
Pressing the [0] to [9] keys on the keypad enters Short Message Mode. In Short Message Mode, a Short
Message can be sent by a user directly entering a Short Message. (Refer to
SDM (FleetSync/NXDN)
Short Message (Short Data Call) on page
Call) on page
Pressing the [0] to [9] keys on the keypad enters Selcall Mode. In Selcall Mode, a call can be initiated by a
user selecting a Fleet/ ID registered in the ID List or directly entering a Fleet/ ID. Then, pressing the Menu
Selcall + Status ([
(FleetSync) Mode, a Status Message can be sent by a user selecting a status configured for Status List or directly
entering a Status number. (Refer to
a Status Message (Status Call) on page
Pressing the [0] to [9] keys on the keypad enters Selcall Mode. In Selcall Mode, a call can be initiated by a
user selecting a Fleet/ ID registered in the ID List or directly entering a Fleet/ ID. Then, pressing the Menu
Selcall + SDM ([
(FleetSync) In Short Message Mode, a Short Message can be sent by a user directly entering a Short Message. (Refer
to 12.4 Making a Selective Call on page 309, 12.7 Sending and Receiving a Short Message (Short Data
Call) on page
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in an NXDN
*1
Individual (NXDN) Conventional system or NXDN Trunking system. In Individual Call Mode, a call can be initiated by a user
selecting a Unit ID registered in the Unit ID List or directly entering a Unit ID.
Pressing the [0] to [9] keys on the keypad allows the transceiver to enter Individual Call Mode in an NXDN
Conventional system or NXDN Trunking system. In Individual Call Mode, a call can be initiated by a user
Individual + Status selecting a Unit ID registered in the Unit ID List or directly entering a Unit ID. Then, pressing the Menu ([
*1
(NXDN) or [*] key while the transceiver is in Individual Call Mode allows the transceiver to enter Status Mode. In
Status Mode, a Status Message can be sent by a user selecting a status configured for NXDN Status List or
directly entering a Status number.
FUNC (K)/Ver 4.00
Table 3-4 Keypad Operation
359.)
309.)
336.)
]) or [*] key while the transceiver is in Selcall Mode allows the transceiver to enter Status Mode. In Status
]) or [*] key while the transceiver is in Selcall Mode allows the transceiver to enter Short Message Mode.
336.)
Description
29.)
29.)
8.9 Sending and Receiving a Status Message (Status Call) on page
163, 12.7 Sending and Receiving a Short Message (Short Data
12.4 Making a Selective Call on page 309, 12.6 Sending and Receiving
323.)
Changing the Channel or GID by
Changing the GID by
30.)
Changing the Channel or GID by
265.)
14 DTMF on page
12.4 Making a
323.)
8.10 Sending and Receiving a
CONTENTS INDEX
10.3
150,
])
21