Kenwood NEXEDGE NX-200 Function Reference page 223

9 NXDN TRUNKING SYSTEM
9.1 Initiating Voice Communications (Basic Transmission and Reception)
9.1 Initiating Voice Communications
(Basic Transmission and Reception)
This section describes the basic methods for transmission and reception in an NXDN Trunking system and the relevant
functions.
About Own ID
To initiate various communications using NXDN, a Unit ID (Own), the identification code of a transceiver, needs to be
configured for the transceiver.
One Unit ID (Own) can be configured for each transceiver. Also, a name specific to the transceiver can be configured for
Unit ID (Own).
Note
In multiple systems, Unit ID (Own) can be configured for each system.
Configuration using KPG-111D/ DN
• Configuring the Unit ID (Own) and the Unit ID Name (Own) (Single System) (
• Configuring the Unit ID (Own) (Multiple Systems) (
About Trunking Type
To establish various types of communications in an NXDN Trunking system, Trunking Type needs to be configured along
with the configuration of the system. Refer to
Control Channel Acquisition and Registration
To establish various types of communications in an NXDN Trunking system, the transceiver needs to acquire a control
channel and register in a system before starting communication. The control channel acquisition and registration are
automatically executed when the transceiver is turned ON or when a system to be used is changed with site roaming.
Refer to 9.2 Control Channel Hunt on page 194
Refer to 9.3 Registration in an NXDN Trunking System on page 199
FUNC (K)/Ver 4.00
FPRG 8.20.3 General Tab)
See
Trunking Type on page 203
for details on the transceiver behavior of control channel acquisition.
for details on the transceiver behavior of registration.
FPRG 8.19.2 General 1 Tab)
See
for Trunking Type.
CONTENTS INDEX 189