Kenwood NEXEDGE NX-200 Function Reference page 548

APPENDIX
Available Functions for the PF Keys
Function Name
Individual + SDM (NXDN)
Individual + Status (NXDN)
Key Lock (Portable only)
LCD Brightness
(Mobile only)
Lone Worker
Low Transmit Power
(Portable only)
Maintenance
Menu
Monitor
FUNC (K)/Ver 4.00
Enters Individual Call Mode in an NXDN Conventional system or NXDN
Trunking system. In Individual Call Mode, a call can be initiated by a user
selecting a Unit ID registered in the Unit ID List or directly entering a Unit
ID. Then, pressing the Menu ([
Individual Call Mode allows the transceiver to enter Short Message
Mode. In Short Message Mode, a Short Message can be sent by a user
directly entering a Short Message. (Refer to
SYSTEM on page 109, 9 NXDN TRUNKING SYSTEM on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Enters Individual Call Mode in an NXDN Conventional system or NXDN
Trunking system. In Individual Call Mode, an Individual Call can be
initiated by a user selecting a Unit ID registered in the Unit ID List or
directly entering a Unit ID. Then, pressing the Menu ([
Individual Call Mode causes the transceiver to enter Status Mode. In
Status Mode, a Status Message can be sent by a user selecting a status
configured for Status List or directly entering a Status number. (Refer to
NXDN CONVENTIONAL SYSTEM on page
SYSTEM on page 187.)
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Toggles the Key Lock between enabled and disabled. (Refer to
Locking the Transceiver Keys (Key Lock) (Portable Only) on page
Gradates the brightness of the backlight. (Refer to
Brightness of the Backlight (LCD Brightness) (Mobile Only) on page
Toggles the Lone Worker between enabled and disabled. (Refer to
Placing the Transceiver in Emergency Mode Using Lone Worker on page
404.)
Toggles the transceiver transmit power between high power and low
power. This function is available only on the channel where "High" is
configured for Transmit Power in KPG-111D/ DN.
Enters Maintenance Display Mode.
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Enters Menu Mode. In Menu Mode, various functions can be configured
or activated. (Refer to 3.4 Using Menu Mode on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
In an Analog Conventional system, the transceiver resets the matching
state of QT tone or DQT code and Optional Signaling and resets muting
upon detection of a carrier.
In an NXDN Conventional system, the transceiver resets the matching
state of RAN code and Optional Signaling and deactivates muting upon
detection of an NXDN frame.
Description
]) or [*] key while the transceiver is in
8 NXDN CONVENTIONAL
]) or [*] key in
109, 9 NXDN TRUNKING
5.5 Changing the
23.)
Available System
NXDN Conventional System
NXDN Trunking System
187.)
NXDN Conventional System
8
NXDN Trunking System
3.9
ALL
63.)
ALL
75.)
ALL
ALL
ALL
ALL
Analog Conventional System
NXDN Conventional System
LTR Trunking System
CONTENTS INDEX
*1
514