Reading The Configuration Data From The Transceiver; Embedding A Message In The Transceiver (Embedded Message); Embedded Message; Embedded Message With Password - Kenwood NEXEDGE NX-200 Function Reference

2 GETTING STARTED
2.3 Reading the Configuration Data from the Transceiver/ 2.4 Embedding a Message in the Transceiver (Embedded
2.3

Reading the Configuration Data from the Transceiver

To change the data configured in the transceiver, read the configuration data from the transceiver to KPG-111D/ DN, and
then write the configuration data to the transceiver after the configuration data has been changed.
Selecting "Read Data from the Transceiver" from the Program pulldown menu in the main window of KPG-111D/ DN
opens the Read Data from the Transceiver dialog box. Clicking the "Read" button starts reading the configuration data
from the transceiver.
Refer to FPRG "9.1 Read Data from the Transceiver" for details.
2.4

Embedding a Message in the Transceiver (Embedded Message)

The message can be written to the transceiver by using KPG-111D/ DN.

Embedded Message

Embedded Message can be used to store a maximum of 64 characters in the transceiver. The transceiver profile
information, such as the control number and the file name of the configuration data written in the transceiver, can be
embedded.
The message can be written to the transceiver by using KPG-111D/ DN. The message written in the transceiver is stored
as a part of the configuration data.
The embedded messages can be read from the transceiver by using KPG-111D/ DN.
Configuration using KPG-111D/ DN
Configuring the Embedded Message (

Embedded Message with Password

Embedded Message with Password can be used to store with a password a maximum of 64 alphanumeric characters and
symbols in the transceiver.
The transceiver profile information, such as the control number and the file name of configuration data written in the
transceiver, can be embedded with a password.
The message and the password can be written to the transceiver by using KPG-111D/ DN. The Embedded Message with
Password is stored in the transceiver as independent data from the configuration data.
The password must be entered to write a message. The message cannot be written to the transceiver unless the correct
password is entered.
The embedded messages can be read from the transceiver by using KPG-111D/ DN.
Configuration using KPG-111D/ DN
Configuring the Embedded Message with Password (
FUNC (K)/Ver 4.00
Figure 2-3 Read Data from the Transceiver Dialog Box
FPRG 8.33 Embedded Message Window)
See
FPRG 8.34 Embedded Message with Password Window)
See
CONTENTS INDEX 13