Kenwood NEXEDGE NX-200 Function Reference page 565

APPENDIX
Key Operations for Each Mode
Key Operations for Each Mode
Key operations for selecting a list or entering characters are described for each mode in this section. Refer to
Operating the Transceiver in Each Mode (Common Operation) on page 42
Note
For NX-200S/ NX-300S, the operations described in this section are unavailable.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
(NX-200/ NX-210/ NX-300 only)
Selecting a list
Key
Selects a 2-tone code from the 2-
tone codes registered in the 2-tone
Press
List by changing the 2-tone codes
one at a time.
Up/ Down
Selects a 2-tone code from those
Hold registered in the 2-tone List by
Down changing from one code to
another continuously.
Side 1 Press
Transmits the 2-tone code after
Side 2 Press
aborting the current mode.
Press
Menu ([ ])
Hold
Down
Back Press
Left Press
Right/Home Press
[0] to [9] Press Selects from the list.
Aborts the current mode.
Press
[*]
Hold
Down
[#] Press
Transmits the 2-tone code after
PTT switch Press
aborting the current mode.
FUNC (K)/Ver 4.00
2-Tone
-
Restores the previous display (if the transceiver enters this mode by a user pressing the Menu key).
-
-
Restores the previous display (if the transceiver enters this mode by a user pressing the Menu key).
for operation methods.
Selecting a list
Selects a DTMF code from those
registered in the Autodial List by
changing the DTMF codes one at
a time.
Selects a DTMF code from those
registered in the Autodial List by
changing from one code to
another continuously.
Aborts the current mode.
Transmits the DTMF code after
aborting the current mode.
Aborts the current mode.
Migrates to the manual entry
mode.
Migrates to the manual entry
mode.
Aborts the current mode.
Selects a DTMF code from the list. Enters a DTMF code.
Migrates to the DTMF code entry mode. Then, press one of the
following keys:
[0]: Redial
[*]: BOT
[#]: EOT
-
Transmits the DTMF code after
aborting the current mode.
3.8
Autodial
Manual entry (prior to entering a
code)
Selects a DTMF code by changing
the DTMF codes one at a time.
Selects a DTMF code by changing
from one code to another
continuously.
-
Migrates to the list selection mode.
Migrates to the list selection mode.
Migrates to the DTMF code entry
mode. Then, pressing the [2], [5],
[8] or [0] key enters "A", "B", "C",
or "D" respectively.
Transmits after aborting the
current mode.
CONTENTS INDEX 531