Kenwood NEXEDGE NX-200 Function Reference page 500

20 OPTIONAL BOARD
20.2 VGS-1
Pressing a key causes the transceiver to restore the normal
display. In this case, the message "You have a message." is
annunciated.
 Disabling the Auto Reply Message
1
Press the Auto Reply Message
The " " icon disappears and then Auto Reply Message is
disabled.
Configuration using KPG-111D/ DN
• Configuring the Auto Reply Message (
• Assigning functions to the PF keys on the transceiver (
Playing Back the Recorded Audio (Message Playback)
Message Playback is the function to play back the received or transmitted audio that has been recorded in Auto
Recording, Voice Memo Mode and Auto Reply Message Mode. Unnecessary recorded data can be deleted.
If Auto Recording was used for the last recorded audio, this recorded audio is played back first. Otherwise, audio data
stored in the VGS-1 flash memory is played back.
The transceiver plays voice data back in the following order:
• Playback SRAM data recorded using Auto Recording
• Auto Recording recorded data
• Voice Memo recorded data
• Auto Reply Message recorded data (return to the beginning)
Pressing the Playback key places the transceiver in Playback Mode and then the recorded data can be played or deleted.
The recorded data can also be played or deleted in Playback Mode if "Playback" is selected after entering Menu Mode by
pressing the Menu key. (Refer to
FUNC (K)/Ver 4.00
key.
See FPRG 8.11.3 VGS-1 Tab)
3.4 Using Menu Mode on page
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
See FPRG 8.12 Key Assignment Window)
23.)
CONTENTS
Mobile
Mobile
INDEX 466