Keypad Operation; Call Key; Mic Sense - Kenwood TK-2170 Series Function Reference

1 BASIC FUNCTIONS

1.10 Keypad Operation

Keypad operation can be configured for the user
preference.
A frequently used function can be configured for access
via the keypad.
Keypad operation can be configured by using
KPG-101D. The following functions can be assigned to
the keypad.
Table 1-8 Available Functions
Configuration
OST (Operator Using the keypad, the OST can be
Selectable Tone) selected from the OST List 1 to 40.
Using the keypad, channels can be
Channel Entry
directly selected.
Using the keypad, the transceiver can
send a selected DTMF code.
The Autodial List configured by using
KPG-101D can be selected and sent.
DTMF (Autodial)
A DTMF code can be entered and sent if
Store & Send is enabled.
A DTMF code can be entered and sent
when the Autodial key is pressed.
DTMF (Keypad Using the keypad, the transceiver can
Auto PTT) directly send DTMF codes.
Using the keypad, the transceiver can
make a FleetSync Selcall.
The Selcall List configured by using
KPG-101D can be selected and sent.
FleetSync (Selcall)
A Selcall ID code can be entered and sent
if Manual Dialing is enabled.
A Selcall ID code can be entered and sent
if the Selcall key is pressed.
Using the keypad, the transceiver can
send a FleetSync Status message.
The Status List configured by using KPG-
101D can be selected and sent.
FleetSync (Status) A Status data number can be entered and
status data can be sent if Manual Dialing
is enabled.
The transceiver can also send Status data
when the Status key is pressed.
Using the keypad, the transceiver can
send FleetSync Selcall + Status.
The Selcall List or Status List configured
by using KPG-101D can be selected and
FleetSync sent.
(Selcall + Status) A Selcall or Status code can be entered
and sent if Manual Dialing is enabled.
The transceiver can also send the Selcall
List or Status List when the Selcall +
Status key is pressed.
6
Index Contents
Operation
Confidential
Configuration using KPG-101D
• Configuring the Keypad Operation (Refer to
FPRG 6.8.2 General Tab - Keypad Operation.)

1.11 Call Key

The Call key is used to send FleetSync Status, 2-tone
and DTMF codes with single key operation.
The transceiver directly sends Status, 2-tone or DTMF
codes configured by using KPG-101D if the Call 1 or Call
2 key is pressed. The timing and duration to send codes
vary depending on the parameters of FleetSync, 2-tone
or DTMF. The FleetSync Status code is sent to the
Target Fleet/ Target ID.
Assign the function to be sent to the Call 1 or Call 2 key
by using KPG-101D.
Configuration using KPG-101D
•
Configuring the Call Key (Refer to FPRG 6.8.4
Call Tab.)

1.12 Mic Sense

Mic Sense Control can be switched between Normal and
High Level. The gain difference between Normal and
High Level is approximately 4 dB.
Mic Sense Control can be configured by using KPG-101D.
Configuration using KPG-101D
•
Configuring the Mic Sense (Refer to FPRG 6.7.1
Common Page 1 Tab - Mic Sense.)
•
Configuring the Emergency Mic Sense (Refer to
FPRG 6.14.12 Emergency Mic Sense.)
FUNC (K)/Ver. 1.01