Kenwood NEXEDGE NX-200 Function Reference page 324

11 LTR TRUNKING SYSTEM
11.5 Connecting to a Public Switched Telephone Network (PSTN) (Telephone Interconnect)
11.5 Connecting to a Public Switched Telephone Network (PSTN)
(Telephone Interconnect)
In an LTR Trunking system, the transceiver can connect to a Public Switched Telephone Network (PSTN) via the Repeater
Interconnect (RIC), which is a repeater connected to a telephone line.
A repeater used in an LTR Trunking system can be configured as the RIC Repeater by using KPG-111D/ DN.
Configuration using KPG-111D/ DN
Configuring the RIC Repeater (
Calling a Telephone Number
Pressing the PTT switch causes the transceiver to connect to a telephone line and initiate a call by manually or
automatically specifying the phone number.
Operating the Transceiver
 Automatically calling a Telephone Number
1
Select the group for which a Telephone ID is configured.
2
Configure the telephone number of the target transceiver using Autodial. (Refer to
Sending the DTMF Code on page
3
Press the PTT switch.
The transceiver automatically connects to a telephone line, and then the transceiver will call the telephone number.
FUNC (K)/Ver 4.00
FPRG 8.5.4 Telephone)
See
360.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
14.1 Method of
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 290