Entering Or Deleting A Code - Kenwood NEXEDGE NX-200 Function Reference

3 BASIC OPERATIONS
3.8 Operating the Transceiver in Each Mode (Common Operation)

Entering or Deleting a Code

This section explains operations using operating examples for Selcall Mode. (Refer to
309.)
Refer to Key Operations for Each Mode on page 531
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
 Entering a code using the Up and Down keys
Following is the operation example to enter "ID 12" in Selcall Mode.
Note
Note:
• Following are the main keys to be used for this operation examples.
To select a code: the Up or Down key
To determine: the Menu ([ ]) or [*] key
• Pressing and holding the Up or Down key causes the code to automatically be scrolled up or down continuously.
• The code that can be entered varies depending on the mode and the number of entered digits.
FUNC (K)/Ver 4.00
for key operations in each mode.
Up or Down key
Select "1". Menu ([ ]) or [*] key (Select)
Up or Down key
Select "2". Menu ([ ]) or [*] key (Select)
Initiating a Selective Call on page
Up key
Down key
Up key
Down key
CONTENTS INDEX 48