Kenwood NEXEDGE NX-200 Function Reference page 343

12 FleetSync
12.4 Making a Selective Call
12.4 Making a Selective Call
Various selective calls are available by using FleetSync IDs.
A user can initiate a call sending their own FleetSync ID and the target transceiver's ID by pressing the PTT switch after
selecting the transceiver they wish to call. The transceiver unmutes the speaker and emits the received audio when the
receiving transceiver receives the FleetSync ID.
The caller's ID appears on the receiving transceiver. The receiving transceiver can respond to the caller by pressing the
PTT switch while the caller's ID appears.
The following Selective Call types are available.
Call Type
This function is used to initiate a call to the specified transceiver.
Individual Call The transceiver determines that the received call is an Individual Call when receiving a Selective Call having the
Fleet and the ID matching its own ID.
This function is used to initiate a call to several transceivers in the specified Fleet.
Group Call The transceiver determines that the received call is a Group Call when receiving a Selective Call having the ID
configured for Group ID and the same Fleet.
This function is used to initiate a call to a party having a FleetSync ID in the same Fleet.
Fleet Call The transceiver determines that the received call is a Fleet Call when receiving a Selective Call having the ID
configured as "0 (ALL)" and the same Fleet.
This function is used to initiate a call to a party having the same ID in each Fleet.
Supervisor Call The transceiver determines that the received call is a Supervisor Call when receiving a Selective Call having the
Fleet configured as "0 (ALL)" and the same ID
This function is used to initiate a call to all transceivers having a FleetSync ID.
Broadcast Call The transceiver determines that the received call is a Broadcast Call when receiving a Selective Call having the
ID configured as "0 (ALL)" and Fleet configured as "0 (ALL)".
Initiating a Selective Call
List Selection or Manual Dialing can be used to initiate a Selective Call.
To use List Selection, a user can initiate a Selective Call by selecting a FleetSync ID configured for ID List. (Refer to
on page 315.)
To use Manual Dialing, a user can initiate a Selective Call by directly specifying the FleetSync ID. The call type is
determined according to the number of entered digits.
Number of
Digits
The transceiver recognizes the entered value as Fleet and ID.
7 digits
fff: Fleet: 100 to 349
fffiiii
iiii: ID: 1000 to 4999
4 digits The transceiver recognizes the entered value as the ID.
iiii iiii: ID: 1000 to 4999
3 digits The transceiver recognizes the entered value as the Fleet.
fff fff: Fleet: 100 to 349
FUNC (K)/Ver 4.00
Table 12-3 Selective Call Type
Description
Table 12-4 Call Type by Manual Dialing
Range Call Type
Individual Call/ Group Call
Individual Call/ Group Call
Fleet Call
CONTENTS INDEX
ID List
309