Kenwood NEXEDGE NX-200 Function Reference page 547

APPENDIX
Available Functions for the PF Keys
Function Name
Group + SDM (NXDN)
Group + Status (NXDN)
High Transmit Power
Home CH/GID
Home CH/GID Select
Horn Alert (Mobile only)
Individual (NXDN)
FUNC (K)/Ver 4.00
For an NXDN Conventional system:
Enters Group Call Mode in an NXDN Conventional system. In Group
Call Mode, a call can be initiated by a user selecting a Group ID
registered in the Group ID List. Then, pressing the Menu ([
key while the transceiver is in Group Call Mode allows the transceiver
to enter Short Message Mode. In Short Message Mode, a Short
Message can be sent by a user directly entering a Short Message.
For an NXDN Trunking system:
Enters Short Message Mode in an NXDN Trunking system. In Short
Message Mode, a Short Message can be sent by a user directly
entering a Short Message. (Refer to
SYSTEM on page 109, 9 NXDN TRUNKING SYSTEM on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
For an NXDN Conventional system:
Enters Group Call Mode in an NXDN Conventional system. In Group
Call Mode, a call can be initiated by a user selecting a Group ID
registered in the Group ID List. Then, pressing the Menu ([
key while the transceiver is in Group Call Mode allows the transceiver
to enter Status Mode. In Status Mode, a Status Message can be sent
by a user selecting a status configured for NXDN Status List or directly
entering a Status number.
For an NXDN Trunking system:
Migrates to Status Mode in an NXDN Trunking system. In Status Mode,
a Status Message can be sent by a user selecting a status configured
for NXDN Status List or directly entering a Status number. (Refer to
NXDN CONVENTIONAL SYSTEM on page
SYSTEM on page 187.)
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Selecting a GID where "Low" is configured for Transmit Power and
pressing the High Transmit Power key toggles the transceiver
transmission power between High and Low.
Selecting a GID where "Auto" is configured for Transmit Power and
pressing the High Transmit Power key toggles the transceiver
transmission power between Auto and High.
Migrates to the channel or GID configured as the Home Channel or GID.
(Refer to Home CH/GID on page
Determines the selected channel or GID as the Home Channel or GID.
(Refer to Home CH/GID on page
Toggles the Horn Alert between enabled and disabled. (Refer to
Controlling Car Behavior by Linking with the Horn Alert Port State (Horn
Alert) on page 493.)
Enters Individual Call Mode in an NXDN Conventional system or NXDN
Trunking system. In Individual Call Mode, an Individual Call can be
initiated by a user selecting a Unit ID registered in the Unit ID List or
directly entering a Unit ID. (Refer to
on page 109, 9 NXDN TRUNKING SYSTEM on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Description
8 NXDN CONVENTIONAL
109, 9 NXDN TRUNKING
32.)
32.)
8 NXDN CONVENTIONAL SYSTEM
187.)
Available System
]) or [*]
NXDN Conventional System
NXDN Trunking System
187.)
]) or [*]
NXDN Conventional System
NXDN Trunking System
8
NXDN Trunking System
ALL
ALL
23.2
ALL
NXDN Conventional System
NXDN Trunking System
CONTENTS INDEX
*1
513