Short Message On Data Zone-Ch/Gid; Sending The Received Short Message From The Communication Port (Short Message Serial Output) - Kenwood NEXEDGE NX-200 Function Reference

12 FleetSync
12.7 Sending and Receiving a Short Message (Short Data Call)

Short Message on Data Zone-CH/GID

Short Message on Data Zone-CH/GID allows the transceiver to automatically migrate to a Data Zone-channel or GID to
send a Short Message.
The transceiver automatically migrates to a Data Zone-channel or GID to send a Short Message. The transceiver restores
the last Zone-channel or GID when the transmission ends. Short Message on Data Zone-CH/GID is used to support data
communications on a specific dedicated channel.
Configuration using KPG-111D/ DN
Configuring the Short Message on Data Zone-CH/GID to be enabled or disabled (
Sending the Received Short Message from the Communication Port
(Short Message Serial Output)
Short Message Serial Output allows the transceiver to transfer the received Short Message and the caller's Fleet and ID
from the transceiver's communication port.
The dispatcher can retrieve the transceiver's status information using a PC.
Configuration using KPG-111D/ DN
Configuring the Short Message Serial Output to be enabled or disabled (
FUNC (K)/Ver 4.00
See FPRG 8.16.4 Parameter Tab)
See FPRG 8.10.6 Common Page 4 Tab)
CONTENTS INDEX 341