Kenwood NEXEDGE NX-200 Function Reference page 211

8 NXDN CONVENTIONAL SYSTEM
8.14 Site Roaming
Quick Site Roaming Level
Quick Site Roaming Level is the function to allow Site Roaming to behave faster when the transceiver is in an area with a
strong signal.
If the transceiver receives a signal of which level is higher than that configured for Quick Site Roaming Level during Site
Roaming, the channel will be the Revert Channel. In this case, Site Roaming Link Delay Time is disabled and the
transceiver unmutes the speaker if the received RAN code matches that preconfigured for the channel.
However, if "Off" is configured for Quick Site Roaming Level and Standard Site Roaming Level, the transceiver initiates
Site Roaming using the threshold value preconfigured in the transceiver.
Configuration using KPG-111D/ DN
Configuring the Quick Site Roaming Level (
Standard Site Roaming Level
Standard Site Roaming Level is the function to allow Site Roaming to behave faster when the transceiver is in an area with
a strong signal.
The transceiver searches a signal of which level is higher than that configured for Standard Site Roaming Level during Site
Roaming.
Since a channel having a signal of which level is lower than that configured for Standard Site Roaming Level is excluded
from Site Roaming, the transceiver does not search the channel. If the transceiver receives a signal of which level is higher
than that configured for Standard Site Roaming Level during Site Roaming, Site Roaming will temporarily pause and then
Site Roaming Link Delay Time will be activated. If the received RAN code matches the RAN code preconfigured for the
channel, the transceiver unmutes the speaker.
However, if "Off" is configured for Quick Site Roaming Level and Standard Site Roaming Level, the transceiver initiates
Site Roaming using the threshold value preconfigured in the transceiver.
Configuration using KPG-111D/ DN
Configuring the Standard Site Roaming Level (
Site Roaming Resume Level
Site Roaming Resume Level is the threshold value of the RSSI level used for determining whether to resume Site
Roaming according to the rise and fall of the RSSI level for the signal received by the transceiver.
If the RSSI level of the received signal is lower than the level preconfigured for Site Roaming Resume Level while the
transceiver remains on the channel synchronized by Site Roaming, Dropout Delay Time will be activated. After the time
configured for Dropout Delay Time elapses, the transceiver resumes Site Roaming. If the RSSI level of the received signal
is higher than the level preconfigured for Site Roaming Resume Level while the Dropout Delay Time is counting down, the
Dropout Delay Time will be extended and the transceiver will not resume Site Roaming.
Configuration using KPG-111D/ DN
Configuring the Site Roaming Resume Level (
FUNC (K)/Ver 4.00
See FPRG 8.13.2 Site Roaming Tab)
See FPRG 8.13.2 Site Roaming Tab)
FPRG 8.13.2 Site Roaming Tab)
See
CONTENTS INDEX 177