19 SCAN
19.3 Scanning All Target Zones for Scanning (Multi Scan)
Operating the Transceiver
1
Press the
Scan
key.
The transceiver starts scanning.
"SCAN" appears on the main display and the "
For NX-200S/ NX-300S, the LED blinks green.
Note
If a channel or GID is fixed and the transceiver cannot resume
scanning, such as when the transceiver is migrating to the
Home Channel or GID, etc., the "
Stop Tone continues to sound from the transceiver.
2
Press the
Scan
key during the scan.
The "
" icon disappears and the scan ends.
For NX-200S/ NX-300S, the LED is turned Off and the scan ends.
Configuration using KPG-111D/ DN
•
Configuring the Zone Add to be enabled or disabled for each zone (Conventional Group) (
Add)
•
Configuring the Zone Add to be enabled or disabled for each zone (LTR Trunking System) (
Add)
•
Configuring the Zone Add to be enabled or disabled for each zone (NXDN Trunking System) (
Zone Add)
•
Configuring the Scan Add to be enabled or disabled for each channel (
•
Configuring the Scan Add to be enabled or disabled for each GID (LTR Trunking System) (
Add)
•
Configuring the Scan Add to be enabled or disabled for each GID (NXDN Trunking System) (
Add)
•
Configuring the Scan Type of the Conventional Group and LTR Trunking system (
•
Configuring the Scan Type of the NXDN Trunking system (
•
Assigning functions to the PF keys on the transceiver (
FUNC (K)/Ver 4.00
" icon appears.
" icon blinks and a Scan
See
FPRG 8.12 Key Assignment Window)
See
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
See
See
See
FPRG 8.3.3 Page 1 Tab)
See
See
FPRG 8.13.1 Scan Tab)
FPRG 8.13.1 Scan Tab)
CONTENTS
FPRG 8.2.13 Zone
FPRG 8.6.11 Zone
See
FPRG 8.8.7
FPRG 8.7.11 Scan
FPRG 8.9.6 Scan
See
INDEX
439