Kenwood NEXEDGE NX-200 Function Reference page 212

8 NXDN CONVENTIONAL SYSTEM
8.14 Site Roaming
Off-hook Site Roaming (Mobile Only)
Off-hook Site Roaming is the function to start the Site Roaming depending on the status of microphone, either on-hook or
off-hook.
The transceiver behaves as follows according to the configuration for Off-hook Site Roaming.
Configuration
The the transceiver can start Site Roaming while the microphone is in either the on-hook state or off-hook state.
Enabled Even if the microphone changes from the On-hook state to Off-hook state during Site Roaming, Site Roaming
will not pause.
The the transceiver can start Site Roaming if the microphone is in the on-hook state. The the transceiver cannot
start Site Roaming if the microphone is in the off-hook state.
If the microphone changes from the On-hook state to Off-hook state during Site Roaming, Site Roaming will
Disabled
temporarily pause on the Revert Channel. Even if the microphone changes from the On-hook state to Off-hook
state while Site Roaming pauses, the channel will not be changed. When the microphone goes to On-hook state,
the transceiver resumes Site Roaming.
Configuration using KPG-111D/ DN
Configuring the Off-hook Site Roaming to be enabled or disabled (
Revert Channel Display
Revert Channel Display is the function to display the selected Revert Channel on the main display during Site Roaming.
Configuration using KPG-111D/ DN
Configuring the Revert Channel Display to be enabled or disabled (
FUNC (K)/Ver 4.00
Table 8-18 Off-hook Site Roaming
Description
See
See
FPRG 8.13.2 Site Roaming Tab)
FPRG 8.13.2 Site Roaming Tab)
CONTENTS INDEX 178