Kenwood NEXEDGE NX-200 Function Reference page 580

APPENDIX
Key Operations for Each Mode
Mobile
Selecting a list
Key
Selects a 2-tone code from the 2-
tone codes registered in the 2-tone
Press
List by changing the 2-tone codes
one at a time.
[ ]/ [ ]
Selects a 2-tone code from those
Hold registered in the 2-tone List by
Down changing from one code to
another continuously.
Triangle Press
Transmits the 2-tone code after
Square Press
aborting the current mode.
Press Aborts the current mode.
Menu ([ ])
Hold
Down
Back Press
Left Press
Right/Home Press
[0] to [9] Press Selects from the list.
[A] to [D] Press
Aborts the current mode.
Press
[*]
Hold
Down
[#] Press
PTT Transmits the 2-tone code after
(microphone) Press aborting the current mode.
switch
FUNC (K)/Ver 4.00
2-Tone (NX-700/ NX-700H/
NX-800/ NX-800H only)
-
Restores the previous display (if the transceiver enters this mode by a user pressing the Menu key).
-
-
-
Restores the previous display (if the transceiver enters this mode by a user pressing the Menu key).
Selecting a list
Selects a DTMF code from those
registered in the Autodial List by
changing the DTMF codes one at
a time.
Selects a DTMF code from those
registered in the Autodial List by
changing from one code to
another continuously.
Aborts the current mode.
Transmits the DTMF code after
aborting the current mode.
Aborts the current mode.
Migrates to the manual entry
mode.
Migrates to the manual entry
mode.
Aborts the current mode.
Selects a DTMF code from the list. Enters a DTMF code.
-
Migrates to the DTMF code entry
mode. Then, press one of the
following keys:
[0]: Redial
[*]: BOT
[#]: EOT
-
Transmits the DTMF code after
aborting the current mode.
Autodial
Manual entry (prior to entering a
code)
Selects a DTMF code by changing
the DTMF codes one at a time.
Selects a DTMF code by changing
from one code to another
continuously.
-
Aborts the current mode.
Migrates to the list selection mode.
Migrates to the list selection mode.
Enters a DTMF code.
Migrates to the DTMF code entry
mode. Then, press one of the
following keys:
[0]: Redial
[*]: BOT
[#]: EOT
Migrates to the DTMF code entry
mode. Then, pressing the [2], [5],
[8] or [0] key enters "A", "B", "C",
or "D" respectively.
Transmits after aborting the
current mode.
CONTENTS INDEX 546