Kenwood NEXEDGE NX-200 Function Reference page 535

25 ADJUSTING THE TIME ON THE TRANSCEIVER
25.2 Power-on Clock Display/ 25.3 Adjusting the Time
Configuration using KPG-111D/ DN
• Assigning functions to the PF keys on the transceiver (
• Configuring the Clock Display (
25.2 Power-on Clock Display
This function allows the transceiver to display the current time for 2 sec after the transceiver is turned ON.
To enable this function, "Clock" must be configured for Power-on Message Type using KPG-111D/ DN.
Note
This function cannot be used with Power-on Text.
Configuration using KPG-111D/ DN
Configuring the Power-on Clock (
25.3 Adjusting the Time
Pressing the Clock Adjustment key causes the transceiver to enter Clock Adjustment Mode and then date and time can
be adjusted.
The date and time can also be adjusted by selecting "Clock Adjustment" after the transceiver enters Clock Adjustment
Mode by a user pressing the Menu key. (Refer to
Note
When the data configured by using KPG-111D/ DN is written to the transceiver, this function can be used to adjust a date and time of
the internal clock of the transceiver by sending the real time clock data that is configured in the PC to the transceiver. (
9.2.2 Time Adjustment)
Operating the Transceiver
1
Press the Clock Adjustment
The transceiver enters Clock Adjustment Mode.
The following operations are identical even if the transceiver
enters Clock Adjustment Mode by a user pressing the Menu key.
FUNC (K)/Ver 4.00
See
See FPRG 8.10.1 Common Page 1 Tab)
FPRG 8.10.2 Common Page 2 Tab)
See
3.4 Using Menu Mode on page
key.
FPRG 8.12 Key Assignment Window)
23.)
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
CONTENTS
See
FRPG
Mobile
INDEX 501