Kenwood NEXEDGE NX-200 Function Reference page 312

10 ANALOG CONVENTIONAL SYSTEM
10.9 Improving the Sound Quality for Transmitting and Receiving (Compander)/ 10.10 Disabling the Transceiver Capability by Remote Control (Stun)
10.9 Improving the Sound Quality for Transmitting and Receiving
(Compander)
Compander is a compound term made from "COMpressor" and "exPANDER", and is a function designed to improve sound
quality.
This function is used to improve the S/ N ratio of voice communications by compressing the audio at the transmitting end
of the communication path and expanding the audio at the receiving end of the path.
The transmitting party and the receiving party must have the same configuration to use this function.
Configuration using KPG-111D/ DN
Configuring the Compander to be enabled or disabled for each channel (
10.10 Disabling the Transceiver Capability by Remote Control
(Stun)
By using the DTMF code, FleetSync status, or MDC-1200 message, it is available to remotely disable the transceiver
capability. This function allows an system administrator to remotely disable the transceiver, for instance, if the transceiver
is lost.
The transceiver which has been disabled by this function can be enabled to be usable again by remote control from an
external device using radio communication.
Refer to the following for details of the Stun (or Kill) function for each format.
• FleetSync
12.11 Disabling the Transceiver Capability by Remote Control (Stun/ Kill) on page 349
• MDC-1200
13.4 Disabling the Transceiver Capability by Remote Control (Stun) on page 358
• DTMF
14.3 Disabling the Transceiver Capability by Remote Control (Stun) on page 371
FUNC (K)/Ver 4.00
See FPRG 8.3.4 Page 2 Tab)
in "12 FLEETSYNC"
in "13 MDC-1200"
in "14 DTMF"
CONTENTS INDEX 278