Kenwood NEXEDGE NX-200 Function Reference page 527

23 FUNCTIONS LINKED WITH A VEHICLE
23.2 Controlling Car Behavior by Linking with the Horn Alert Port State (Horn Alert)
The Timed Power-off Pre-alert Tone sounds from the transceiver in the following way if anything other than "Off" is
configured for Warning Tone:
• 1 min before the transceiver is turned OFF: The transceiver beeps twice. (Timed Power-off Pre-alert Tone A)
• 10 sec before the transceiver is turned OFF: The transceiver beeps 4 times. (Timed Power-off Pre-alert Tone B)
• 2 sec before the transceiver is turned OFF: The transceiver beeps continuously. (Timed Power-off Pre-alert Tone C)
Note
• Timed Power-off is reset if the Ignition Sense port goes high.
• If "Ignition and Switch" is configured for the Ignition Sense Type, the Timed Power-off timer is not activated when the transceiver is
turned ON by pressing and holding the Power switch.
• If "Ignition and Switch" is configured for the Ignition Sense Type, the Timed Power-off timer is reset when the Power switch is pressed
while the Timed Power-off is activated. Pressing and holding the Power switch causes the transceiver to be turned OFF.
Configuration using KPG-111D/ DN
Configuring the Timed Power-off (
23.2 Controlling Car Behavior by Linking with the Horn Alert Port
State (Horn Alert)
Horn Alert can be used to activate the Horn Alert port for a certain amount of time when the transceiver receives a call.
This function turns headlights On of the vehicle connected to the Horn Alert port and makes the horn sound. Therefore, a
user can recognize that the transceiver has received a call with lighting of headlights of the vehicle and the horn even if the
user is away from the transceiver.
Pressing the Horn Alert key causes the Horn Alert to be enabled or disabled.
Horn Alert can also be enabled or disabled by selecting "Horn Alert" after entering Menu Mode by pressing the Menu key.
(Refer to 3.4 Using Menu Mode on page
Note
An optional KAP-2 is required to activate the Horn Alert.
Operating the Transceiver
 Enabling the Horn Alert
1
Press the Horn Alert
Horn Alert will be enabled. "HA" appears on the sub-display.
 Disabling the Horn Alert
1
Press the Horn Alert
Horn Alert will be disabled. "HA" on the sub-display disappears.
FUNC (K)/Ver 4.00
See FPRG 8.10.1 Common Page 1 Tab)
23.)
key while Horn Alert is disabled.
key while Horn Alert is enabled.
CONTENTS INDEX 493