Kenwood NEXEDGE NX-200 Function Reference page 563

APPENDIX
Functions Not Available with NX-200S/ NX-300S
Item
NXDN
Individual Call
Individual Call (Individual Call
Acknowledge Request)
Individual Call (Message Trunked
(Enhanced))
Group Call
Group Call Display
Caller ID Display
Paging Call
Status Call
Short Data Call
Timer Function
Special Status
Auto Reset Timer
Manual Dialing
Message Display Type
Caller ID Stack
Status Message Stack
Short Message Stack
Latest Received Message Stack
Message Memory
ID/Message Stack with Time Stamp
Maintenance Display
Secure Cryptographic Module
Panel Test Mode
Panel Tuning Mode
Clone Mode
Firmware Version Information Mode
FUNC (K)/Ver 4.00
• Individual Call Mode is unavailable.
• Individual Calls can be initiated by using Selcall on PTT.
• Individual Call Mode and Stack Mode are unavailable.
• Individual Calls can be initiated by using the Call 1 to Call 6 keys or Selcall on PTT.
• Group Call Mode is unavailable.
• A Group Call can be initiated with Selcall on PTT.
• Status Mode is unavailable.
• Status Messages can be sent by using the Call 1 to Call 6 keys.
Short Message Mode is unavailable.
The clock function is unavailable.
Only available by using the PC command.
The parameter of LCD is unavailable for Auto Reset Timer.
PC Test Mode is available.
PC Tuning Mode is available. However, LCD Contrast and RTC adjustment are
exempted.
Remarks
CONTENTS INDEX 529