Kenwood NEXEDGE NX-200 Function Reference page 560

APPENDIX
Available Functions for COM Port
COM Port Functions
The following functions of each communication port can be configured using KPG-111D/ DN.
Function
Polarity is the logic of data lines for sending data using a communication port where "GPS" is assigned.
Polarity However, Polarity of COM port 0 is fixed at Normal in order to communicate with KPG-111D/ DN and the
configuration cannot be changed.
Stop Bit is the bit information for sending data using a communication port where "Data", "GPS", "Data + GPS Data
Output", "Transparent", or "Transparent 2 (NXDN)" is assigned. "1" or "2" can be configured for Stop Bit.
Stop Bit
However, for Mobile, Stop Bit of COM port 0 is fixed at "2" in order to communicate with KPG-111D/ DN and the
configuration cannot be changed.
Baud Rate is the communication rate for sending data using a communication port where "Data", "GPS", "Data +
Baud Rate GPS Data Output", "Transparent", or "Transparent 2 (NXDN)" is assigned.
Baud Rate can be configured by selecting from 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps.
Configuration using KPG-111D/ DN
• Configuring the Polarity (
• Configuring the Stop Bit (
• Configuring the Baud Rate (
Serial Protocol Types
There are 2 types of serial protocols to be used for controlling a transceiver by using PC commands: Version 1 and Version
2. The serial protocol type (PC Interface Protocol) can be configured using KPG-111D/ DN.
Configuration
The command sequence of this version starts with STX (Start of Text) and ends with ETX (End of Text). This version
Version 1
is compatible with transceivers that support the Kenwood PC Interface Protocol.
This version is almost the same as the Version 1 data format, but it has the command sequence of Version 1 and a
Version 2
sequence number (SEQ).
Configuration using KPG-111D/ DN
Configuring the PC Interface Protocol (
FUNC (K)/Ver 4.00
Table 1-7 COM Port Functions
FPRG 8.10.3 Common Page 3 Tab)
See
FPRG 8.10.3 Common Page 3 Tab)
See
See FPRG 8.10.3 Common Page 3 Tab)
Table 1-8 Serial Protocol Types
FPRG 8.10.3 Common Page 3 Tab)
See
Description
Description
CONTENTS INDEX 526