Kenwood NEXEDGE NX-200 Function Reference page 174

8 NXDN CONVENTIONAL SYSTEM
8.6 Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call
Sending an Acknowledgment Automatically (Automatic Response)
Automatic Response is the function to automatically send an acknowledgment message upon receipt of a message
requesting an acknowledgment of an Individual Call.
If this function is enabled, the transceiver automatically sends an acknowledgment message upon receipt of a message
requesting an acknowledgment of an Individual Call.
If this function is disabled, the transceiver automatically sends no acknowledgment message even if the transceiver has
received a message requesting an acknowledgment of an Individual Call. In this case, an acknowledgment message can
be sent manually by operating the transceiver. Refer to " If Automatic Response is disabled:" in
Call (Individual Call Acknowledge Request) on page 137
Configuration using KPG-111D/ DN
Configuring the Automatic Response to be enabled or disabled (
Configuring the Maximum Length of Time to Wait to Receive an Acknowledgment
Message (Initiate/Incoming Reset Time)
Initiating/Incoming Reset Time is the maximum length of time for which the transmitting transceiver is on standby to
receive an acknowledgment message from the receiving transceiver after sending a message requesting an
acknowledgment of an Individual Call.
If Automatic Response is disabled, Initiating/Incoming Reset Time can also be used as the maximum length of time that
allows the transceiver to send an acknowledgment message by operating the transceiver after receiving a message
requesting an acknowledgment of an Individual Call. If the time configured for Initiating/Incoming Reset Time elapses, the
transceiver resets the standby state, and the display reverts to the channel display.
Configuration using KPG-111D/ DN
Configuring the Initiating/Incoming Reset Time (
FUNC (K)/Ver 4.00
for instruction.
See FPRG 8.19.5 Conventional Tab)
FPRG 8.19.5 Conventional Tab)
See
Receiving an Individual
CONTENTS INDEX 140