Kenwood NEXEDGE NX-200 Function Reference page 431

16 COMMUNICATIONS IN AN EMERGENCY
16.2 Zone-CH/GID Used for Emergency Mode
• If a channel in an NXDN Conventional system is configured for Emergency Zone-CH/GID:
The transceiver behaves according to the configuration for Emergency ID (NXDN Conventional).
Configuration
None The transceiver transmits only using the RAN code.
If "Group ID" is configured for Emergency NXDN ID Type, the transceiver initiates a Group Call using the Group ID
configured for Emergency NXDN ID.
NXDN
If "Unit ID" is configured for Emergency NXDN ID Type, the transceiver initiates an Individual Call using the Unit ID
configured for Emergency NXDN ID.
• If a GID in an NXDN Trunking system is configured for Emergency Zone-CH/GID:
The transceiver behaves according to the configuration for Emergency ID (NXDN Trunking).
Configuration
The transceiver initiates a Group Call using the Group ID configured for Emergency NXDN ID.
Group ID
When receiving a Group Call, the transceiver also uses the Group ID configured for Emergency NXDN ID.
The transceiver initiates an Individual Call using the Unit ID configured for Emergency NXDN ID.
Unit ID
When receiving a Group Call, the transceiver uses the Group ID configured for Emergency Zone-CH/GID.
Configuration using KPG-111D/ DN
• Configuring the Emergency CH/GID Type (
• Configuring the Emergency ID (Analog) (
• Configuring the Emergency ID (NXDN Conventional) (
• Configuring the Emergency ID (NXDN Trunking) (
Emergency Zone-CH/GID
Emergency Zone-CH/GID is the zone-channel or GID used in Emergency Mode if "Fixed" is configured for Emergency CH/
GID Type.
Configuration using KPG-111D/ DN
Configuring the Emergency Zone-CH/GID (
FUNC (K)/Ver 4.00
Table 16-6 Emergency ID (NXDN Conventional)
Description
Table 16-7 Emergency ID (NXDN Trunking)
Description
FPRG 8.28.1 Emergency 1 Tab)
See
FPRG 8.28.2 Emergency 2 Tab)
See
See
FPRG 8.28.2 Emergency 2 Tab)
See
See FPRG 8.28.1 Emergency 1 Tab)
FPRG 8.28.2 Emergency 2 Tab)
CONTENTS INDEX 397