Kenwood NEXEDGE NX-200 Function Reference page 542

26 MODE
26.5 Checking the Firmware Version (Firmware Version Information Mode)
26.5 Checking the Firmware Version
(Firmware Version Information Mode)
Firmware Version Information Mode can be used to check the version number of the firmware written to the transceiver.
Note
This function is unavailable for NX-200S/ NX-300S.
Operating the Transceiver
1
Press and hold the
turn the transceiver ON.
The transceiver enters Firmware Version Information Mode. The
version number of the transceiver written to the transceiver
appears.
2
Release the Side 1
The transceiver exits Firmware Version Information Mode, and
then the transceiver enters User Mode.
Configuration using KPG-111D/ DN
Configuring whether to permit the use of Firmware Version Information Mode (
FUNC (K)/Ver 4.00
Side 1 key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411) or the
key (NX-200/ NX-210/ NX-300/ NX-410/ NX-411) or the
Triangle key (Mobile) to
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Triangle key (Mobile).
FPRG 8.10.2 Common Page 2 Tab)
See
CONTENTS INDEX 508